Firmware/Flash FilesRIVO

Rivo RX298 Flash file Free Download SP7731GEA

Download Rivo RX298 Flash file Free Download SP7731GEA. SP7731GEA_scx35_sp7731gea_6.0_W10_MT6580_3GW_B15_EMMC_QHD_RIVO_RX298_20180202_RX298. Rivo RX298 Firmware 100% free and tested.

How to Flash Rivo RX298 Flash File

You can flash this .PAC.sc image file using Infinity CM2SPD.If you have Infinity CM2SPD Tool then read this help

  • install required SPD drivers and CM2SPD Tool.
  • open CM2SPD Tool and from Settings Tab Select CPU SP[SC773x] eMMC [Generic 4.x-5.0]
  • From Flash Tab click on PAC and select .pac.sc file and then click on Flash Button.
  • Press and Hold Boot Key or use Boot Cable and Insert USB Cable.
  • Wait until flashing complete
  • You are done 🙂

Cautions:

Please, Backup all data Before Flashing. This .bin File is tested by HOWUNLOCK.COM on Rivo RX298 which works fine on this Model Version. The battery should be Charged more than 60%.

Do This on your own risk. We are not responsible for Any Damage or data loss. Downloading this file you must have to agree with our Privacy Policy and Disclaimer. Please have a look at our Terms of  Use.

Features

This file is from a working phone. This File is 100% Free and tested on Rivo RX298. No need to enter any password for this file.

Log from Infinity SPD

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

==== Wait for phone…

Phone found! [ 15 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 15 ] Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : sp7731geaplus_dt_oversea
Model Brand : IQ4528-Quad
Model Device: scx35_sp7731gea
AndrVersion : 6.0
BaseBand CPU: SP7731GEA
Project Ver : W10_MT6580_3GW_B15_EMMC_QHD_RIVO_RX298_20180202
Model Ext : RX298

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1384 MiB
Saved to : C:\Users\H2five\Desktop\Rivo rx298 backup\SP7731GEA_scx35_sp7731gea_6.0_W10_MT6580_3GW_B15_EMMC_QHD_RIVO_RX298_20180202_RX298\
Done!

Elapsed: 00:06:09

Reconnect Power/Cable!

Download Menu
Tags

Hasnain Siddiqui

I am Developer, Programmer and Article writer. Blogging is my profession.

Related Articles

Leave a Reply

Close

Adblock Detected

Please consider supporting us by disabling your ad blocker