QMobile Power9 Pro Flash File/Firmware SPD6531 100% Tested Bin File

QMobile Power9 Pro Flash File/Firmware SPD6531 100% Tested Bin File. Download Latest flash file for Qmobile Power9 Pro free. QMobile Power9 Pro Flash File is available to download.

How to Flash QMobile Power9 Pro Flash File

You can use any professional tool to flash this firmware link Infinity CM2SPD Miracle Box etc

If You have infinity CM2SPD then read these easy steps

  • install required SPD Drivers and CM2SPD Tool.
  • open CM2SPD Tool and Select SPD6531 from CPU
  • From Flash Tab click on Select and select .BIN file and then click on Flash Button.
  • Power off the phone and then Press and Hold Boot Key and Insert USB Cable until phone detected.
  • Wait until flashing complete
  • You are done 🙂


Please, Backup all data Before Flashing. This File is tested by HOWUNLOCK.COM on QMobile Power9 Pro which works fine on this Model Version. The battery should be Charged more than 60%.

Do This on your own risk. We are not responsible for Any Damage or data loss. Downloading this file you must have to agree with our Privacy Policy and Disclaimer. Please have a look at our Terms of  Use.


This File is 100% Tested and Working. It is Free of cost. The file is not protected with the password.

Log from infinity CM2SPD

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

Phone found! [ 42 ] Port Opened
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sending boot …
Boot Sent , starting…
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : QMobile
Model Name : Power9 Pro
ExtInfo Data : EN
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_W25Q32_EN__QMobile-Power9 Pro.bin

Elapsed: 00:00:39

Reconnect Power/Cable!

Go to Download Page

Hasnain Siddiqui

I am Developer, Programmer and Article writer. Blogging is my profession.