Jinyou D6969 Flash File MT6261 100% Tested. Download K988_XM4_FR_PCB01_gprs_MT6261_S00 file. Download Jinyou D6969 Flash File and get the dead phone alive.
Contents
How to Flash Jinyou D6969 Flash File
You can use any professional tool like Infinity CM2MTK, Ultimate Multi Tool – MTK, Miracle Box etc.
If you are using CM2MTK Tool then this guide will help you.
- install required MTK Drivers and CM2MTK Tool.
- open CM2MTK Tool and from Settings Tab Select CPU FP :
- From Flash Tab click on Bin and select .Bin file and then click on Flash Button.
- Turn off the phone.
- Press and Hold Boot Key or use Boot Cable and Insert USB Cable.
- Wait until flashing complete
- You are done 🙂
Screenshots
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )
Wait for phone…
Phone found! [ 49 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 9CC656D7189C7F7419BD113B4CD693F5
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …
Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : K988_XM4_FR_PCB01_gprs_MT6261_S00.K988_JSD_XM4_FR.bin
FileVersion : K988_JSD_XM4_FR
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\K988_XM4_FR_PCB01_gprs_MT6261_S00\
Done!
Elapsed: 00:00:18
Reconnect Power/Cable!
Please, Backup all data Before Flashing. This File is tested by HOWUNLOCK.COM on Jinyou D6969 which works fine on this Model Version. The battery should be Charged more than 60%. Do This on your own risk. We are not responsible for Any Damage or data loss. Downloading this file you must have to agree with our Privacy Policy and Disclaimer. Please have a look at our Terms of Use.Cautions:
This File is Password Protected. Please contact me to get the password.
Contact:
Whatsapp: +923082638935
Facebook: FB/HowunlockWeb
Other Article: Commando COM1313 Flash File SC6533G Free Download
